Doing The Job Right ALWAYS Matters

Serving Collin County And Nearby Communities


Fall Check-Up

More often than not, fall time checkups are overlooked or forgotten about. There are (primarily) two types of heating systems used in the North Texas area. The most common type in the urban area is gas heat. The other type of heating equipment is electric heat. This can utilize a heat pump, electric heat strips, or the two of them working together.

Gas heat has flames burning inside your house and for safety reasons a yearly basic checkup is prudent. With the checkup all portions of your heating system will be tested and cleaned so that your system will run efficiently for the upcoming winter season.

Electric heat and heat pumps have no flames, which drastically reduce safety concerns, but these systems have a much larger utility consumption rate. Proper function of all components will help minimize your electric bills and keep your equipment running at full capacity.

With both types of equipment, routine maintenance is the best way to have your equipment function at peak performance levels and maximize your utility dollars spent. Have us come out to check your equipment and keep your home safe and comfortable!

Fall Maintenance

Inside Check Includes:

  • Proper system operations
  • Filters
  • Airflow
  • Blower motors and wheels
  • Safety switches and controls for proper operation
  • Electrical wiring and connections
  • Electrical controls
  • Amp draws
  • Induced draft motor
  • Ignition system inspection/test
  • Heat exchangers (if applicable)
  • Heat strip operation and amp draw (if applicable)
  • Gas piping and connections
  • Proper condensate drainage
  • Fan belt and pulleys/sheave (if applicable)
  • Lubricate motor and shaft (if applicable)
  • Visual leak inspections
  • Temperature rise
  • Thermostat
  • Clean flame sensor
  • Clean orifices
  • Clean electronic air cleaners (if applicable)
  • Change filter if provided

*will provide and change standard 1" filters (pleated) for additional $10 each and Standard media filters $52 each

Outside Check Includes (heat pump systems):
  • Refrigerant level
  • Refrigerant piping and insulation
  • Condenser fan motor and blade
  • Compressor Amp draws
  • Electrical wiring and connections
  • Defrost board and defrost operations
  • Contactor
  • Capacitor(s)
  • Airflow
  • Visual leak inspections

Spring Check-Up


Did you know?

Bryant has been around since 1904. Charles Bryant is the developer of the modern day furnace and offered 80% efficiency on their furnaces in 1919. They partnered with Payne in 1949 and in the mid 1950s were bought by Carrier. In the 1980s Bryant was one of the first pioneers of the 90% furnace. That is part of why Prosper's Finest A/C and Heat is proud to be a Bryant Factory Authorized Dealer!